Cold air near an exterior door can come from several places: the threshold, the perimeter seal, the frame-to-wall junction or simply air circulating past a cold surface. Locating the pattern first prevents a pile of weatherstripping from making the door harder to use without addressing the real gap.
Observe without flame or smoke
Close and latch the door normally. Use ordinary visual observation and feel for air movement with a hand near, not inside, the accessible gaps. Do not use a candle, lighter or improvised smoke test. Note whether the sensation is at one corner, across the bottom or around the whole frame.
Look for daylight where the design should close tightly, but do not confuse a designed drainage or ventilation opening with a defect. Check for debris at the threshold and whether a mat is preventing the door from reaching its usual position.
Repeat the observation during different conditions if the issue is mild. A windy afternoon and a calm evening may produce different results. Record the door location and the wind-facing side of the house, without treating that pattern as a confirmed diagnosis.
Examine how the door closes
Does the latch engage without lifting or pushing the slab? Is the reveal around the edge visibly uneven? Is a weatherstrip torn or detached? Photograph those details before changing anything. A sticking hinge or shifted frame can create a seal problem that extra foam will not solve.
Clean accessible contact surfaces using their approved care method. Do not adjust hinges, plane the edge or remove a threshold merely to explore the draft. Some doors have security, fire or weather-performance features that should remain within the manufacturer's repair instructions.
DOE's weatherization guidance treats proper door operation as part of the result, not an optional extra. Any sealing work must preserve easy opening, secure closing and the required exit function.
Choose the smallest appropriate next action
A damaged replaceable sweep may call for the correct part; an uncertain frame gap may need installer assessment. Bring the model details, photographs and observations to the supplier rather than asking only for the thickest seal available.
For a rented home, report the condition through the maintenance process before altering the door. Describe when it occurs and whether water entry or locking difficulty accompanies it. Those details help distinguish comfort work from a more urgent repair.
After an approved change, check both operation and the original symptom. Open the door fully, close it normally and verify that mats or loose seals do not catch. Keep the old observation record long enough to compare conditions; a warmer day alone is not evidence that the gap has been corrected.



